4 Microphone inputs; 3 external dynamic MIC and one internal condenser MIC.
One line input for cassete, DAT or digital recordert

From -20 to -75 dBu.
Non clipping MIC preamplifier at any level

Balanced audio ouBalanced audio output 0 dBu / 10 Kohms

2 outputs with internal Hybrid. One for phone line (POT) and one for cellular phone

Flat 20-15.000 Hz plus an anti-pop filter with -6 dB @ 30 Hz and Low pass filter -3 dB @ 12 Khz

MIC to mono out: 20 – 20.000 Hz +/- 0,5 dB
plus -3 dB @ 20 Hz anti pop filter
Stereo Line to Stereo Out: 20-20.000 Hz +/- 0,2 dB
Stereo Line to Digital at 64 Kbits/s: 30-15.000 Hz +/- 0,5 dB

Less than 0,4 % @ 1 Khz

70 dBA Signal/Noise ratio with -40 dBu MIC level

16 dB action with 2 LED indication.
10 ms attack time and 200 ms recovery

Peak limiter after compressor stage to avoid digital saturation of cellular phones.

Full use of advanced CMOS amplifiers with very low power consumption , for long battery duration

Full wireless Bluetooth connection with 16 bits converter.
Red and Green indication of status
Backup of cellular link: RJ11 open cable to be connected to the Hands-free kit of the second cellular phone.

Internal dialer for making call to Studios. The console is connected to RJ11 like a regular phone set.

The console includes a multivoltage 90 V to 240 V, USB battery charger, with automatic voltage selection

MX 2100 works continously during 16 hours
Can be charged in one night
It uses a standard low cost 3,6 V battery used for wireless phone sets.

IDimensions: 121 mm x 129mm x 37 mm
Weight: 600 gr (0,6 Kg)