Especificaciones Técnicas
Technical Specifications
FM Audio Processor Solidyne 362HD
Inputs
1-XLR3 conector, level self-adjusted 0 dBu to + 15 dBu 600 ohms balanced
2-RCA unbal, level self adjusted -15 to 0 dBu, 10 K
3-RJ45 stereo balanced (compatible with StudioHUB, Axia, etc) 0 dBu to + 15 dBu, 600 ohms balanced
All with R internal > 10 Kohms
4-Optional digital stereo USB input for PC direct connection
Outputs
1-Analog Balanced, + 4 dBu; Z= 600 / 10 Kohms, with de-emphasis (flat response)
2-Optional USB digital stereo input (flat response) for direct connection to PC
MPX Output
Two MPX outputs with individual level control with preset at rear side
600/10 Kohms, level from 0,5 to 4 Vpp
Differential output, BNC connector, floating ground 50 ohms
Allows 45 dB canceling buzz & noise due to ground loops
Frequency
Response
20 – 16.000 Hz +/- 0,5 dB
measured below compression & limiter threshold
Harmonic
Distortion
Below 0,02 % @ 30-15.000 Hz
Noise
Below – 90 dBA ref 100 % modulation
Stereo
Separation
> 75 dBA
Subsonic Filter
Chebyshev 2nd order, 15 Hz
Asymmetry
Cancelling
5 : 1 cancelling effect, using Khann-Bonello system
Expander
10:1 slope, 0,1 msec attack time, 200 msec release
AGC (wideband)
VCA controlled, 30 dB range, 3 sec attack/release
Multiband
Compressors
3 bands, 18 dB/octave,
Linear Phase crossover
Compressors: 30 dB range, 5:1 slope,VCA controlled
Automatic attack time
Release time user controlled by 3 x ENERGY controls
IM Cancelled
Clipper
IM clipper cancellation > 30 dB below 250 hz
Dynamic EQ
0 – 12 dB dynamic boost at Low, Mid and High Frecuency
Front panel user controlled
Processing
7 stages of processing devices
Power
115 V / 230 V (rear switch selected) 50/60 Hz, 20 W
Dimensions
19″ rack mount. Module one (44,4 mm) // weight 3 Kg Net; (4 Kg for courier freight)
Stereo Coder – Digital with oversampling 16x (608 kHz)
Audio input
2 Vpp for 100 % MPX output (4 Vpp)
MPX output
Two MPX outputs with individual level control with preset at rear side
Differential output, BNC connector, floating ground 50 ohms. Allows 45 dB canceling
buzz & noise due to ground loops
Level of each output adjustable from 0,5 to 4 Vpp 600/10 kohms
Frequency Response
20-15.000 +/- 0,2 dB,
plus 15 Khz/5 order eliptic, Active FDNR, L.P. filter
Attenuation at 19 Khz > 50 dB
Harmonic
Distortion
From 30-15.000 Hz, below 0,005 %
Measured using Belar Digital Stereo decoder DSD-1A and Tektronix 5L4 N Spectrum Analyzer
Signal to Noise
Ratio
Better than 90 dBA with reference to 100% modulation
Measured using Belar Digital Stereo decoder model DSD-1A
Stereo
Separation
> 65 dB at 1 Khz
38 Khz suppression
Below – 70 dB Ref 100% modulation
57, 76 & 95 Khz
suppression
Below – 75 dB Ref 100% modulation
Pilot tone
stability
+/- 0,002 % (+/- 0,5 Hz)